Olympus CX-DO Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny Olympus CX-DO. Olympus CX-DO 13 stron. Dual-viewing attachment

1. Clean all glass components

by wiping gently with gauze. To remove fingerprints

or oil smudges, wipe with gauze

slightly moistened

with xylene or a mixture of ether (70%) and alcohol (30%).

Since both ether and alcohol are highly flammable,

be careful to keep these chemicals

away from open

fire and potential

sources of electrical

sparks, such as when the main switch is turned ON.

2. Do not attempt to use organic solvents to clean the non-optical components

of this attachment.

To clean these,

use a lint-free, soft cloth lightly moistened with a diluted neutral detergent.

3. Do not disassemble

any part of the dual-viewing

attachment

as this could result in malfunctions

or reduced

performance.

4. When not using the dual-viewing

attachment,

keep it covered with the provided dust cover.

If the dual-viewing

attachment

is used in a manner not specified in this manual, the safety of the user may be

imperiled.

In addition, the equipment

may also be damaged. Always operate the equipment

as outlined

instruction manual.

The following

symbols are used to set off text in this instruction

manual.

: Indicates that failure to follow the instructions

in the warning could result in bodily

harm to the user and/or damage to equipment

(including objects in the vicinity of the

equipment).

* : Indicates that failure to follow the instructions could result in damage to equipment.

Q : Indicates commentary

(for ease of operation and maintenance).

in this