Olympus MX61A Manual - Page 33
Browse online or download pdf Manual for Laboratory Equipment Olympus MX61A. Olympus MX61A 48 pages. Motorized 300 mm compatible semiconductor/fpd inspection microscope
@
CONFIG 2/6 screen
²
|
Focus step selection screen
Setting the Focus Step (FOCUS SETUP)
}The recommended focus step values for the objective magnifications
are displayed as the default values.
The focus step refers to the Z-stage displacement per touch of the focus
fine adjustment switch.
1. If it is required to modify a recommended focus step value, touch the
switch @ below the preset value to open the focus step selection
screen.
2. Touch the desired focus step value ² and touch the OK switch ³ to
enter it.
If the desired focus step value is not shown in the focus step selection
screen, touch the page up/down switch | until the desired focus step
value is displayed (up to a total of 2 pages are provided).
3. Touch the OK switch to display the CONFIG 1/6 screen again.
³
MX61A
30