Axminster 104356 Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Accessories Axminster 104356. Axminster 104356 2 pages. Tooling stylus tip ballpoint pen kit - chrome

Print Page

ASSEMBLY, HINTS & TIPS

1. Layout parts according to diagram A,

ensuring the turned Pen Barrels are the

same orientation as when mounted on

the mandrel.

Note: When removing the blanks from

the mandrel, use a felt tip pen to mark

the inside of each tube where they join to

maintain the grain or pattern alignment.

2. Press the Clip/Stylus Assembly into the

top of the (shorter) Upper Pen Barrel.

DIAGRAM A

Visit the Knowledge blog 'How To Make A Pen' for hints, tips and videos

knowledge.axminstertools.com/pen-turning

V I E W O U R F U L L R A N G E O F

P E N C A S E S A N D D I S P L A Y B O X E S O N L I N E

3. Press the Threaded Insert into the

bottom of the (shorter) Upper Pen

Barrel.

4. Screw the Screwdriver (tool end first)

into the Threaded Insert.

5. Press the top of (longer) Lower Pen

Barrel onto the back end of the

Screwdriver.

6. Screw the Refill into the Nib.

Axminster Tools, Axminster, Devon, EX13 5PH

A X M I N S T E R T O O L S . C O M

8. Push the Nib into the bottom of the

(longer) Lower Pen Barrel.

Tips/Hints

• Use a woodworking vice, one handed bar

clamp, arbor press or a dedicated pen

press.

• Press parts together slowly and steadily

• When pressing the parts together,

CHECK the parts are correctly aligned

with each other and straight. If the part

is crooked or misaligned, it will result in

a poor fit or render the pen unuseable.

• When laying out your pen barrel with

the parts, pay careful attention to keep

the pen barrels in the same orientation

as when on the mandrel. i.e. a pen

barrel may have a "top" and "bottom",

now is the time to be certain of the

orientation.