AccuMed AP212 User Manual - Page 4

Browse online or download pdf User Manual for Pulse Generator AccuMed AP212. AccuMed AP212 15 pages. Mini electronic pulse stimulator

Print Page
3)
This device is not a substitute for pain medications and other pain management therapies.
4)
This device has no curative value.
5)
This device is a symptomatic treatment and, as such, suppresses the sensation of pain that would otherwise serve as a
protective mechanism.
6)
The long-term effects of electrical stimulation are unknown.
7)
The user may experience skin irritation, burns or hypersensitivity due to the electrical stimulation or electrical conductive
medium.
8)
The user has suspected or diagnosed epilepsy. The user should follow precautions recommended by his or her physician.
9)
Use caution if the user has a tendency to bleed internally, such as following an injury or fracture.
10) Use caution if stimulation is applied over the menstruating uterus.
11) Use caution if stimulation is applied over areas of skin that lack normal sensation.
12) Stop using the device if it does not provide pain relief.
13) Use this device only with the leads, electrodes, and accessories provided and recommended by the manufacturer.
Medical Electrical Equipment needs special precautions regarding electromagnetic compatibility (EMC) and needs to be installed
and put into service according to the EMC information provided. Portable and mobile radio frequency (RF) communication
equipment can affect Medical Electrical Equipment.
NOTE:
1)
Never connect this product with a common headphone.
2)
Please do not touch the USB port when using the device. The USB port is only used to connect the charger. Do not connect
other devices.
3)
The charger supplied by the manufacturer must in compliance with IEC/EN 60601-1, the use of unauthorized chargers can
impair the safety or damage the device.
4)
The battery needs to be charged for up to 10 hours before the first use.
5)
Only charge the unit when battery is completely drained the first 2 times after initial use. Unplug the charger from power
outlet when charging is complete. When stimulation intensity decreases, it indicates that the device needs charging.
Recharge it and then continue to use the device.
6)
Do not use the device while charging the battery.
Environmental condition for transport and storage:
Easily fragile product
Keep the product in a dry place away from water and rain.
Product package should be recycled.
Stacked up 4 cartons at most

SPECIFICATIONS AND ESSENTIAL PERFORMANCE:

Essential performance: The values of pulse duration, amplitudes, and repetition frequencies do not deviate by more than ±30%
when measured with an error not exceeding ±10% into a load resistance (500Ω) within the range specified by the manufacturer.
- Power supply: DC 3.7V
- Output voltage: 42V@500Ω
- Output current: 84mA@500Ω
- Consumed current: 40mA
- Pulse width: 100μS
- Frequency: 1~110Hz
- Smallest are of electrode pad: 4cm
- Timer: 10~60 minutes
- Strength level adjustment: 20 grades
- Charger: Input: 100-240V 50/60Hz 0.18A Max; Output:
presence of a flammable gases, with oxygen or nitrous oxide, or for continuous operation.
2
250mA; Class II, not applied part, not suitable for use in the
4