Cinetron CV-88W User Manual And Installation Instruction - Page 14
Browse online or download pdf User Manual And Installation Instruction for Fan Cinetron CV-88W. Cinetron CV-88W 18 pages. Thermo ventilator
Print Page
Instructions
FUNCTION
APPLICATION
Automatic detection
AUTO
operation mode
VENT
(Wind speed switch
Air exhaust
key high/low)
Delay power off
Air exhaust
15 minutes
The bathroom in the
COOL
cool wind (Summer)
(Wind speed switch
Clothes dry,
key high/low)
bathroom dry
HEAT
(Wind speed switch
Warm air
key high/low)
DRY
Rapid drying of the
(Wind speed switch
bathroom, laundry
key high/low)
drying
CIR
(High/low
Bathroom cycle
fan speed key switch)
OSC
Swing direction
(up and down
of the wind swing
automatic)
ION
ION generation
09
Pre-set
OPERATION STATUS
/
Default
Circulation
Air outlet
PTC heater
setting
/
/
/
1h
High/Low
ON
OFF
2h (1-24h)
speed
Low
ON
OFF
15 Min
speed
Half Open
High/Low
(About 15
OFF
4h (1-24h)
speed
degrees)
High/Low
OFF
ON
2h (1-24h)
speed
Half Open
High/Low
(About 15
ON
4h (1-24h)
speed
degrees)
High/Low
OFF
OFF
2h (1-24h)
speed
30~60
Default
Degree
/
/
90 degree
oscillation
ON/OFF
/
/
/
1. AUTO Function
：
Start: press "AUTO
" button, the "AUTO
to run in automatic mode, and the air volume runs at the mode of "Lo
machine will run at different modes according to the room temperature(air volume automatically
at "Hi
" mode).
a. Room temperature>24 ℃ degrees, the "CIR
b. Room temperature<20 ℃ degrees, the "Heat
c. 20 ℃ degrees<room temperature<24 ℃ degrees, the "Dry Hot
d. Timer: default setting is 1 hour, it is not changeable.
Stop: press the "ON/OFF
" button or pre-set time runs over, "AUTO
off, and the time display will disappear, and the machine stops automatically.
2. Ventilation Function
Start: press the "Vent
" button , the "Vent
"Lo
" mode. Press the "Speed" button to inter-change the "Hi
Timer: the default setting is 2 hours, By pressing the button "Time-up-down" to select time duration.
The time could be set from 1 hour to 24 hours. The time counter will be showed on the "88" LED
display. The time selection will be recorded in memory when it is off, and will resume in next usage.
Under the mode, the inter-change of air volume between "Hi
time counting.
Stop: press the "ON/OFF
" button or pre-set time runs over, "Vent
and the time display will disappear, and the machine stops automatically.
3. Delay Vent Function
Start: press "Delay Vent
" button, and the "Delay Vent
vent mode. It will stop after 15 minutes as default setting. Time could not be selected, and no display.
Stop: press "ON/OFF
" button, and the default time run over, the machine will stop automatically.
4.Cool Function
：
Start: press "Dry Cool
" button to start with a "Hi
on. You can choose "Hi
" or "Lo
" air volume by continuously press "SPEED
Timer: the default time is 4 hours. By pressing "TIME-UP-DOWN" button to select time duration. The
time can be set form 1 hour to 24 hours. The remaining time will be showed on the LED display. The
time selection will be recorded in memory when it is off, and will resume in your next usage.
Under the mode, the inter-change of air volume between "Hi
counting.
Stop: press the "ON/OFF
" button or pre-set time runs over, "Dry Cool
and the time display will disappear, and the machine stops automatically.
Function Descriptions
" indication light gets on, and the machine starts
". After 20 seconds, the
" mode.
" mode.
" mode.
" indication light gets
：
" indication light gets on, air volume will run the
" or "Lo
" mode.
" and "Lo
" will not affect the
" indication light gets off,
：
" indication light gets on, it runs delay
" mode for operation and indication light gets
" button.
" and "Lo
" will not affect the time
" indication light gets off,
10