Cinetron CV-88W User Manual And Installation Instruction - Page 15
Browse online or download pdf User Manual And Installation Instruction for Fan Cinetron CV-88W. Cinetron CV-88W 18 pages. Thermo ventilator
Print Page
Function Descriptions
5. Heat Function
：
Start: press "Heat
" button to start with a "Lo
You can choose "Hi
" or "Lo
" air volume by continuously press "SPEED
Timer: the default time is 2 hours. By pressing "Time-up-down" button to select time duration. The time
can be set form 1 hour to 24 hours. The remaining time will be showed on the LED display. The time
selection will be recorded in memory when it is off, and will resume in your next usage.
Under the mode, the inter-change of air volume between "Hi
counting.
Stop: press the "ON/OFF
" button or pre-set time runs over, "Heat
and the time display will disappear, and the machine stops automatically.
When the heater stops running, the fan will continuously run for around 35 seconds to cool down the
heater.
6.Dry Hot Function
Start: press "Dry
" button to start with a "Lo
on. You can choose "Hi
" or "Lo
Timer: the default time is 4 hours. By pressing "Time-up-down" button to select time duration. The time
can be set form 1 hour to 24 hours. The remaining time will be showed on the LED display. The time
selection will be recorded in memory when it is off, and will resume in your nextusage.
Under the mode, the inter-change of air volume between "Hi
time counting.
Stop: press the "ON/OFF
" button or pre-set time runs over, "Dry
the time display will disappear, and the machine stops automatically.
When the heater stops running, the fan will continuously run for around 35 seconds to cool down the
heater.
7.CIR Function
：
Start: press "CIR
" button to start with a "Hi
You can choose "Hi
" or "Lo
" air volume by continuously press "SPEED
Timer: the default time is 2 hours. By pressing "Time-up-down" button to select time duration. The time
can be set form 1 hour to 24 hours. The remaining time will be showed on the LED display. The time
selection will be recorded in memory when it is off, and will resume in your next usage.
Under the mode, the inter-change of air volume between "Hi
time counting.
Stop: press the "ON/OFF
" button or pre-set time runs over, "CIR
the time display will disappear, and the machine stops automatically.
11
" mode for operation and indication light gets on.
" button.
" and "Lo
" will not affect the time
" indication light gets off,
：
" mode for operation and indication light gets
" air volume by continuously press "SPEED
" button.
" and "Lo
" will not affect the
" indication light gets off, and
" mode for operation and indication light gets on.
" button.
" and "Lo
" will not affect the
" indication light gets off, and
8. Auto-swing
：
Start: default running the on and off operation, same with fan. If it is ON, LED "
and "
" icon will disappear when it is off. When it is off, the swing function is invalid, and the louver
will resume to 0 degree position.
Start2 : When it is fan mode, the default is 90 degree louver position.
Auto-swing When the fan is running, press the "OSC
position to swing from 45 degree to 90 degree. Press "OSC
stop, and if you press it again, it will run auto-swing again.
90
45~90 degree
First start
degree
oscillation
Autimatically memorize
Restart
previous setting
Stop: When press "Stop
" button or pre-set time runs over, the louver will return to 0 degree
position. But then it will resume in next usage, as recorded in memory.
9.Ionizer Function
：
Boot: ON state, the host machine body receiver display window marked bright.
OFF state, the host machine body receiver display window marked out close.
In the OFF state of the circulating fan, the negative ion key is invalid.
Stop: in the process of running, press the negative ion
the host receiver display window Marked out close;
once again pressed the button, negative ions
display window marked bright. So repeatedly.
10.Emergency Button：
Press the start emergency button to automatic mode operation, once again touch the emergency
button to switch to the ventilation mode operation, and touch again the emergency button to switch
to standby mode
Function Descriptions
" icon will display,
" button, the louver will turn from 90 degree
" button again, auto-swing function will
45~90 degree
Stop at any angle
oscillation
0
Stop and
Stop at any angle
degree
shut off
button, negative ions do OFF action, while
do ON action, while the host machine body receiver
Emergency Button
12