Cino XS speedmix H5 Operating Manual - Page 8

Browse online or download pdf Operating Manual for Coffee Maker Cino XS speedmix H5. Cino XS speedmix H5 20 pages.

Print Page

Operating manual

2.1

For this, we

recommend our ready

for use HACCP

cleaning agent

2.2

2.3

Product chutes get

clogged if they are

wet.

XS Speedmix H5

2. Cleaning instructions

General cleaning instructions

This cleaning instruction is an extension of the user

instructions given on inner surface of the machine cover. The

cleaning instructions constitute instructions for daily, weekly

and monthly cleaning. Please follow the cleaning instructions.

This would ensure more hygiene and lesser malfunctions.

Daily cleaning

1. Fill up the products: First of all check the level of all

existing products in the machine. Close the red shut-off flap of

the product container in advance. Now fill in the product given

on the product container. After this again open the red shut-off

flap of the product container.

2. Carry out the rinsing program:

Press the program button on the inner side of the machine

door. A program menu is shown on the display. Press key 4

where 4 = RINSING. Now place a large vessel under the

outlet. For the mixing bowl 1 press key 1. Now rinse this

mixing bowl thoroughly in multiple rinsing cycles. After that

press keys 2, 3 and so on. Press individual keys multiple times

until around 3 litre of hot water has been used for rinsing. After

that press the program key to re-enter the sales mode.

3. Clean the water drip pan: With the door open, remove the

drip pan as follows: lightly press downwards and pull out.

Remove the grid from the drip pan and clean both parts under

warm running water. After that again set the drip pan properly

in place.

4. Clean the doors in the product dispensing area: Clean

the doors in the product dispensing area from inside as well as

outside. Here you could find deposits caused by splashing of

the product. Use a damp sponge or cloth to clean these parts.

Weekly cleaning

Cleaning steps described under sections 1 to 4 are included

here.

5. Clean the mixing bowls: Turn the red locking clamp to left.

Now you can pull out the mixing bowl. Take out the mixing

bowls completely with pipe and discharge angle. Clean these

parts using the rinsing solution meant for the purpose. Again

dry up the parts carefully.

6. Clean the product chutes: Press the product chute lightly

against the product container and turn it to the left in the

anticlockwise direction. Clean these product chutes using the

rinsing solution meant for the purpose. Again dry up these

products properly before reinstallation.

7. Clean the water storage tanks: Lift the water storage tank

(blue) slightly using the handle, and pull out. Clean the water

storage tank by rubbing off the deposits under warm running

water. Remove lime deposits with mild vinegar. Afterwards

rinse the water tank several times. If you are using a filter set

in the water tank clean it the same way.

Version FXSHD 12A onwards

29.12.2003