CipherLab CPT-720 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Battery Charger CipherLab CPT-720. CipherLab CPT-720 2 pages. Cradle
Also for CipherLab CPT-720: Quick Start Manual (2 pages)

Print Page

2. Stand alone, connect the Cradle to Host computer with the

supplied RS-232 cable. (Fig. 3)

3. Multi-drop connection, connect the Cradle to Host computer

with the supplied RS-232 cable. Then connect every unit

directly to the previous unit. Up to 32 units can be connected

together. Note that each cradle should use its own power

supply. (Fig4)

Cautions

1. Use only specified rechargeable batteries.

2. Do NOT charge disposable batteries, terminal or cradle

may be damaged.

3. Do NOT discharge the batteries whilst transmitting

data.

4. Do NOT use or store this unit in a humid or dusty place.

5. Keep unit in a dry place

When not in use, please remove the AC adaptor from

the wall outlet.

Note

After inserting the rechargeable battery into the spare battery

charging slot, the cradle will charge the battery until full charge

is reached. (Fig. 5)

However, if you load a fully charged battery into the CPT-720

and insert the unit into the Main Terminal charging slot, the LCD

may show only 75% full initially. (Fig. 6)

This is normal as the voltage level of a charged battery will drop

from peak level and stabilize at a level lower than full charge.

The charging circuitry will take up to 30 minutes before the LCD

shows 100%.

(Fig. 7)

Syntech Information Co., Ltd

. - 8F, No.210 Ta-Tung Road, Sec3, His-Chih, Taipei Hsien, Taiwan

<Fig.3>

<Fig.4>

<Fig. 5>

<Fig. 6>

<Fig.7>