CipherLab CPT-720 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Carregador de bateria CipherLab CPT-720. CipherLab CPT-720 2 páginas. Cradle
Também para CipherLab CPT-720: Manual de início rápido (2 páginas)
Imprimir página2. Stand alone, connect the Cradle to Host computer with the
supplied RS-232 cable. (Fig. 3)
3. Multi-drop connection, connect the Cradle to Host computer
with the supplied RS-232 cable. Then connect every unit
directly to the previous unit. Up to 32 units can be connected
together. Note that each cradle should use its own power
supply. (Fig4)
Cautions
1. Use only specified rechargeable batteries.
2. Do NOT charge disposable batteries, terminal or cradle
may be damaged.
3. Do NOT discharge the batteries whilst transmitting
data.
4. Do NOT use or store this unit in a humid or dusty place.
5. Keep unit in a dry place
6.
When not in use, please remove the AC adaptor from
the wall outlet.
Note
After inserting the rechargeable battery into the spare battery
charging slot, the cradle will charge the battery until full charge
is reached. (Fig. 5)
However, if you load a fully charged battery into the CPT-720
and insert the unit into the Main Terminal charging slot, the LCD
may show only 75% full initially. (Fig. 6)
This is normal as the voltage level of a charged battery will drop
from peak level and stabilize at a level lower than full charge.
The charging circuitry will take up to 30 minutes before the LCD
shows 100%.
(Fig. 7)
Syntech Information Co., Ltd
. - 8F, No.210 Ta-Tung Road, Sec3, His-Chih, Taipei Hsien, Taiwan
<Fig.3>
<Fig.4>
<Fig. 5>
<Fig. 6>
<Fig.7>