CIPTA PERNIKA NUSANTARA SMART VMS Device Instructions - Page 6
Browse online or download pdf Device Instructions for Boating Equipment CIPTA PERNIKA NUSANTARA SMART VMS. CIPTA PERNIKA NUSANTARA SMART VMS 6 pages.
Also for CIPTA PERNIKA NUSANTARA SMART VMS: Manual (3 pages)
3.2. Power cable installation with power supply
Connect red (+) and black (-) cable to 12-24V DC power supplied by vessel, then
connect it to devices
*Power cable installation will make power LED lit to green colour
From Source
DC 12-24 V
3.3. Position service activation by Superadmin
Make sure LED connectivity (middle) lit static green, if not wait it to change
green and not blink.
*If already green and stable, you can call Superadmin to activate the position
service
4. [OPTIONAL] Integrasi Automatic Identification System (AIS)
4.1. Connection AIS Data Cable to Armada Data Cable
If vessel already using AIS device, look about it's specification and check the
output. Find the output cable of AIS device, then connect it to Armada data
cable
* If you buy bundle with AIS Transceiver, we don't need to connect to AIS devices
that installed on vessel. Just connect AIS device that bundle to Armada data
cable.
4.2. AIS service activation by superadmin
Make sure connectivity LED (midle) light static green, if not wait till it's change to
static green.
*After it's change to green, you can contact Superadmin to activate position
services.
5. [OPSIONAL] Integrasi Armada Data Acquisition Unit (DAQ)
This process is in another document..
NMEA OUT +
From Source
DC 12-24 V
NMEA OUT -
A
B
Device Installation
5