CIPTA PERNIKA NUSANTARA SMART VMS Instructies voor het apparaat - Pagina 6

Blader online of download pdf Instructies voor het apparaat voor {categorie_naam} CIPTA PERNIKA NUSANTARA SMART VMS. CIPTA PERNIKA NUSANTARA SMART VMS 6 pagina's.
Ook voor CIPTA PERNIKA NUSANTARA SMART VMS: Handmatig (3 pagina's)

Pagina afdrukken

3.2. Power cable installation with power supply

Connect red (+) and black (-) cable to 12-24V DC power supplied by vessel, then

connect it to devices

*Power cable installation will make power LED lit to green colour

From Source

DC 12-24 V

3.3. Position service activation by Superadmin

Make sure LED connectivity (middle) lit static green, if not wait it to change

green and not blink.

*If already green and stable, you can call Superadmin to activate the position

service

4. [OPTIONAL] Integrasi Automatic Identification System (AIS)

4.1. Connection AIS Data Cable to Armada Data Cable

If vessel already using AIS device, look about it's specification and check the

output. Find the output cable of AIS device, then connect it to Armada data

cable

* If you buy bundle with AIS Transceiver, we don't need to connect to AIS devices

that installed on vessel. Just connect AIS device that bundle to Armada data

cable.

4.2. AIS service activation by superadmin

Make sure connectivity LED (midle) light static green, if not wait till it's change to

static green.

*After it's change to green, you can contact Superadmin to activate position

services.

5. [OPSIONAL] Integrasi Armada Data Acquisition Unit (DAQ)

This process is in another document..

NMEA OUT +

From Source

DC 12-24 V

NMEA OUT -

Device Installation