Arcan CP400 Assembly Instructions Manual - Page 7

Browse online or download pdf Assembly Instructions Manual for Power Tool Arcan CP400. Arcan CP400 12 pages. Shop press

Print Page
PUMP AND RAM ASSEMBLY INSTRUCTIONS
8
A
This end up
B
This end up
CP400 Operation Manual
Note: Handle ram carefully to avoid damage to gauge or gauge face.
Do not disconnect hoses prior to assembly.
Note: Allow ram to rest on press
bed while installing pump.
Ram bolts directly to press frame using 4 of the 10 bolts included
with the press (one bolt, one washer and one nut for each corner
of the ram and for each of four holes in the press frame).
Attach bolts to opposite corners first. Hand tighten.
Wrench tighten after all four bolts have been tightened.
Note: There are two sets of holes for bolts.
Use centermost holes on the side.
Note: Hose must run BEHIND frame.
Inside of press frame,
looking up
Top of press frame, looking down
6