Arcan CP400 Instrukcja montażu - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Elektronarzędzie Arcan CP400. Arcan CP400 12 stron. Shop press

PUMP AND RAM ASSEMBLY INSTRUCTIONS

This end up

CP400 Operation Manual

Note: Handle ram carefully to avoid damage to gauge or gauge face.

Do not disconnect hoses prior to assembly.

Note: Allow ram to rest on press

bed while installing pump.

Ram bolts directly to press frame using 4 of the 10 bolts included

with the press (one bolt, one washer and one nut for each corner

of the ram and for each of four holes in the press frame).

Attach bolts to opposite corners ﬁrst. Hand tighten.

Wrench tighten after all four bolts have been tightened.

Note: There are two sets of holes for bolts.

Use centermost holes on the side.

Note: Hose must run BEHIND frame.

Inside of press frame,

looking up

Top of press frame, looking down