ARCBRO Scout2 Service Support - Page 3

Browse online or download pdf Service Support for Industrial Equipment ARCBRO Scout2. ARCBRO Scout2 4 pages. How to solve machine does not arcing

Print Page

Service Support Spirit

ARC ON Light

Solution： Keep pressing 【ARCING TEST】Button on the THC panel, If【ARCON】

light is on , At the same time, there is has an output arcing signal on the THC board.

--Check ARCING Signal ,Keep pressing 【ARCING TEST】Button, At the same time, Use

a multimeter to check.

If there is a ON between ARCSTART_1 and ARCSTART_2. Prove that the THC is working;

If there is a OFF between ARCSTART_1 and ARCSTART_2. Prove that the THC is Bad ,Please

change new THC;

Test CNC ARCING signal:

Keep pressing 【Piercing】Button on the CNC panel, If 【 ARCON】light is on , At the same

time, there is has an output arcing signal on the THC board.

--Check ARCING Signal ,Keep pressing 【Piercing】Button, At the same time, Use a

multimeter to check.

If there is a ON between ARCSTART_1 and ARCSTART_2. Prove that the CNC is working;

If there is a OFF between ARCSTART_1 and ARCSTART_2. Prove that the CNC is Bad ,Please

contact ARCBRO;

Unique Solution

ARCING TEST