digico A-CONTROL8 Getting Started Manual - Page 11

Browse online or download pdf Getting Started Manual for Remote Control digico A-CONTROL8. digico A-CONTROL8 15 pages. For 4rea4

Print Page

5. Connect and power up

When connecting multiple AC Remote Controllers to the same network, ensure each unit

is set to a unique Name and IP Address beforehand. Alternatively, you can enable DHCP

on the Remote Controllers, provided a DHCP Server is present on the network and the

DHCP range is compatible with the IP Address of the mixing system.

The factory default settings are as follows:

Unit Name

DHCP

IP Address

Subnet Mask

Gateway

There are two ways of editing these settings:

Browser access

Network port of the A-CONTROL8. Set your computer to a

compatible, static IP Address, for example 192.168.1.100 with

Subnet 255.255.255.0. Open a web browser and type the A-

CONTROL8 default IP Address 192.168.1.73 in the URL bar. This

will give access to the unit network settings. Repeat the operation

for each A-CONTROL8 unit.

4REA4 software

Network port. Use the 4REA4 Controller software to edit the A-

CONTROL8 network settings. Once applied, repeat the operation

for each A-CONTROL8 unit.



Refer to the 4REA4 Reference Guide available for download at

http://www.digico.biz

A-Control8 Getting Started Guide

A-CONTROL8

Off

192.168.1.73

255.255.255.0

192.168.1.254

– Connect a PC or Mac computer to the

– Connect the A-CONTROL8 to a 4REA4

for more information.

AP11452 Issue 1