Axxess XSVI-9006-NAV Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Recording Equipment Axxess XSVI-9006-NAV. Axxess XSVI-9006-NAV 8 pages. Volkswagen data interface 2015-up

Print Page

INSTALLATION

With the key in the off position:

1. Connect the XSVI-9006 harness into the interface, and then to the wiring harness in the

vehicle.

Note: The harness will connect to the harness removed from the disc drive located in the

glove box for remote tuner applications.

2. If an ASWC-1 (sold separately) will be used, do not connect it until the interface is

programmed and fully functional.

PROGRAMMING

Attention! If the interface ever loses power, the following steps will need to be performed again.

Please ensure that the owner of the vehicle knows this.

1. Turn the key (or push-to-start button) to the ignition position and wait until the radio comes on.

Note: If the radio doesn't not come on within 60 seconds, turn the key to the off position,

disconnect the interface, check all connections, reconnect the interface, and then try again.

2. Turn the key (or push-to-start button) to the off position, then to the accessory position.

Test all functions of the installation for proper operation, before reassembling the dash.

REV. 3/11/2019 INSTXSVI-9006-NAV