Arcflash Labs SGP-34 User Manual - Page 12
Browse online or download pdf User Manual for Industrial Equipment Arcflash Labs SGP-34. Arcflash Labs SGP-34 13 pages. Single stage scr coilgun
Print Pagecome on, this indicates a charging system fault. If this happens, please contact Arcflash
Labs for support.
Ensure the green LED activates
7. The red LED indicates that the capacitor is charged and the gun is ready to fire.
8. Rack the slide slowly back until you hear a light click, and gently guide the slide forward to
chamber the first round. DO NOT let go of the slide from the rear position.
9. The gun is now charged and loaded. Press the trigger to fire.
3.2 Shutdown
- The heat sink is hot enough to burn you after extended operation. Even without firing a
round, the heat sink may still be hot.
1. Remove the magazine.
2. Discharge any round still left in the chamber.
3. Shut off the main switch, ensure both the red and green LEDs extinguish.
4. Wait 10 seconds, and perform a chamber inspection as described in section 2.2, being
careful to point the gun in a safe direction.
5. Remove the battery.
6. Wait for the heat sink to cool before storing. Use the back of your hand to feel the air
above the heat sink without touching it. The heat sink may still be hot enough to burn,
even after the gun has been shut down.
Ensure the red LED activates
12 |
P a g e