DigiGrid DiGiGrid Q User Manual - Page 5
Browse online or download pdf User Manual for Amplifier DigiGrid DiGiGrid Q. DigiGrid DiGiGrid Q 18 pages.
Print Page
Input Sources
There are four different monitoring options that you can choose from with the DiGiGrid Q. Press down on the
headphone level control to cycle through these options:
Analog – Unbalanced stereo analog input on phono RCA connectors.
ANA
AES – Stereo AES/EBU input on XLR.
DIG
SoundGrid network – Two-channel SoundGrid input from your SoundGrid network.
NET
Bluetooth – Stereo input from smartphone, tablet, or computer, via Bluetooth.
BT
The selected input source is indicated on the top panel, in front of the Headphone Level control. Please note that the
inputs feed only the headphone amplifier. They do not appear as inputs to the SoundGrid network.
Setting up Bluetooth
The Bluetooth LED on the Q top panel flashes blue and red alternatively when the unit is unpaired.
To set up Bluetooth monitoring, choose BT by pressing down on the volume button until selected, enable Bluetooth
on your tablet / phone / computer, and view the available Bluetooth devices.
The DiGiGrid Q is identified in the Bluetooth setup with the name "DiGiGrid Q-XXXX," where the XXXX is a unique
identifier.
When the DiGiGrid Q device appears, select it and choose to pair. You will not need to enter a passcode. When the
pairing process is complete, the Bluetooth indicators on the top panel of the Q will flash blue only, which indicates
successful pairing.
Bluetooth operates over a relatively short range. If you experience audio dropouts when using the Bluetooth, move
the Q closer to the transmitting device.
5
DiGiGrid Q / User Guide