DigiGrid DiGiGrid Q Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач DigiGrid DiGiGrid Q. DigiGrid DiGiGrid Q 18 сторінок.

Input Sources

There are four different monitoring options that you can choose from with the DiGiGrid Q. Press down on the

headphone level control to cycle through these options:

Analog – Unbalanced stereo analog input on phono RCA connectors.

ANA

AES – Stereo AES/EBU input on XLR.

DIG

SoundGrid network – Two-channel SoundGrid input from your SoundGrid network.

NET

Bluetooth – Stereo input from smartphone, tablet, or computer, via Bluetooth.

The selected input source is indicated on the top panel, in front of the Headphone Level control. Please note that the

inputs feed only the headphone amplifier. They do not appear as inputs to the SoundGrid network.

The Bluetooth LED on the Q top panel flashes blue and red alternatively when the unit is unpaired.

To set up Bluetooth monitoring, choose BT by pressing down on the volume button until selected, enable Bluetooth

on your tablet / phone / computer, and view the available Bluetooth devices.

The DiGiGrid Q is identified in the Bluetooth setup with the name "DiGiGrid Q-XXXX," where the XXXX is a unique

identifier.

When the DiGiGrid Q device appears, select it and choose to pair. You will not need to enter a passcode. When the

pairing process is complete, the Bluetooth indicators on the top panel of the Q will flash blue only, which indicates

successful pairing.

Bluetooth operates over a relatively short range. If you experience audio dropouts when using the Bluetooth, move

the Q closer to the transmitting device.

DiGiGrid Q / User Guide