Accusom Home Sleep Test User Manual - Page 5

Browse online or download pdf User Manual for Personal Care Products Accusom Home Sleep Test. Accusom Home Sleep Test 8 pages. Test
Also for Accusom Home Sleep Test: User Manual (9 pages)

Print Page

STEP 3: Connecting Breath Sensor

STEP 4: Turning on the

4A.

• Turn device on by pressing ON/OFF button firmly for 2 seconds

and then let go.

• The sensor lights on the unit will flash until each sensor is

placed properly.

• All sensor lights on the AccuSom unit should be GREEN.

The device will announce "System is now recording".

• If there is an issue with a connector, the AccuSom will announce "Check

sensor", and one or more lights on the device will flash

yellow, indicating which sensor(s) needs attention.

• You may go to sleep once

the device is successfully

connected to your arm.

Please note that

device may

be placed below

the elbow.

to Face and AccuSom

3A.

• Tighten the slide ring

upwards under chin.

• Place the Breath

sensor under your

nose (as pictured) with

the two round humps

under your nose. The sensor

is positioned correctly when the single large hole

is on the right side of your face.

• Attach the sensor to your face with a 2-inch piece

of the enclosed tape.

AccuSom

3B. Connect sensor

to the port on the

Device

™

System is now

recording.

™

bottom of

the device.