Accusom Home Sleep Test Kullanıcı Kılavuzu - Sayfa 5
Kişisel Bakım Ürünleri Accusom Home Sleep Test için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Accusom Home Sleep Test 8 sayfaları. Test
Ayrıca Accusom Home Sleep Test için: Kullanıcı Kılavuzu (9 sayfalar)
Sayfayı Yazdır
STEP 3: Connecting Breath Sensor
STEP 4: Turning on the
4A.
• Turn device on by pressing ON/OFF button firmly for 2 seconds
and then let go.
• The sensor lights on the unit will flash until each sensor is
placed properly.
• All sensor lights on the AccuSom unit should be GREEN.
The device will announce "System is now recording".
• If there is an issue with a connector, the AccuSom will announce "Check
sensor", and one or more lights on the device will flash
yellow, indicating which sensor(s) needs attention.
• You may go to sleep once
the device is successfully
connected to your arm.
Please note that
device may
be placed below
the elbow.
to Face and AccuSom
3A.
• Tighten the slide ring
upwards under chin.
• Place the Breath
sensor under your
nose (as pictured) with
the two round humps
under your nose. The sensor
is positioned correctly when the single large hole
is on the right side of your face.
• Attach the sensor to your face with a 2-inch piece
of the enclosed tape.
AccuSom
3B. Connect sensor
to the port on the
Device
™
System is now
recording.
™
bottom of
the device.
5