Accusplit Healthengine AH190M28 Operating Instructions Manual - Page 2

Browse online or download pdf Operating Instructions Manual for Pedometer Accusplit Healthengine AH190M28. Accusplit Healthengine AH190M28 8 pages. Accusplit pedometer operating instructions ah190m28
Also for Accusplit Healthengine AH190M28: Operating Instructions (4 pages)

Print Page

Accusplit Healthengine AH190M28 Operating Instructions Manual

Sec1:4-Sec1:5

SETTING UP YOUR PEDOMETER

ACCUSPLIT products use a common setting procedure, S1-

S2-S3-S4.

Press S1 for 2 seconds: Enter the SET mode

Press S2: Change the ﬁ eld to be set

Press S3: Change the ﬁ eld value

Press S4 for 2 seconds: Exit the SET mode

Sec1:6-Sec1:7

1. Repeatedly press the yellow MODE button until the

pedometer displays the current step count. (The

display will show a line underneath the word "STEP"

on the label.)

2. S1: Press and hold the yellow S1 (MODE) button for 2

seconds. The HOUR display will start to blink, showing

that you've entered SET mode.

3. S3: Press the S3 ▲ (MEMORY) button to increase the

HOUR display. Press the S3 ▼ (RESET) button to de

crease the HOUR display. Hold the button down to

change hours quickly. PM hours are displayed in

military time (1:00 PM is 13:00, 2:00 PM is 14:00, etc.).

Setting the Clock

STEP count

8722

5:18

Clock

Speed

The clock must be set in order for the memory's automatic

rollover function to work correctly.

4. S2: Press the yellow S2 (MODE) button to switch from

the HOUR display to the MINUTE display. The MINUTE

display will start to blink.

5. S3: Press the S3 ▲ (MEMORY) button to increase the

MINUTE display. Press the S3 ▼ (RESET) button to

decrease the MINUTE display. Hold the button down to

change minutes quickly.

6. S2: Press the yellow S2 (MODE) button again to enter

WEIGHT setting mode.

Mile/h