Cisco ASR 900 Series Configuration Manual - Page 10

Browse online or download pdf Configuration Manual for Switch Cisco ASR 900 Series. Cisco ASR 900 Series 19 pages. Configuring 1g traffic on 8-port 10 gigabit ethernet interface module
Also for Cisco ASR 900 Series: Configuration Manual (13 pages), Configuration Manual (6 pages), Configuration Manual (6 pages)

Print Page

Cisco ASR 900 Series Configuration Manual

Command or Action

Step 2

configure terminal

Example:

Device# configure terminal

Step 3

cdp timer seconds

Example:

Device(config)# cdp timer 30

Step 4

cdp holdtime seconds

Example:

Device(config)# cdp holdtime 90

Step 5

end

Example:

Device(config)# end

Disabling and Reenabling Cisco Discovery Protocol Version 2 Advertisements

The broadcasting of Cisco Discovery Protocol Version 2 advertisements is enabled by default on Cisco devices. To disable or reenable

this broadcasting, perform these tasks.

Disabling Cisco Discovery Protocol Version 2 Advertisements

Procedure

Command or Action

Step 1

enable

Example:

Device> enable

Step 2

configure terminal

Example:

Device# configure terminal

Purpose

Enters global configuration mode.

Specifies the frequency of transmission of Cisco Discovery

Protocol packets.

Specifies the time for which a receiving device should hold

information before discarding it.

Enters privileged EXEC mode.

Purpose

Enables privileged EXEC mode.

• Enter your password if prompted.

Enters global configuration mode.