Cisco ASR 900 Series Panduan Konfigurasi - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih Cisco ASR 900 Series. Cisco ASR 900 Series 19 halaman. Configuring 1g traffic on 8-port 10 gigabit
ethernet interface module
Juga untuk Cisco ASR 900 Series: Panduan Konfigurasi (13 halaman), Panduan Konfigurasi (6 halaman), Panduan Konfigurasi (6 halaman)
Halaman Cetak
Command or Action
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
cdp timer seconds
Example:
Device(config)# cdp timer 30
Step 4
cdp holdtime seconds
Example:
Device(config)# cdp holdtime 90
Step 5
end
Example:
Device(config)# end
Disabling and Reenabling Cisco Discovery Protocol Version 2 Advertisements
The broadcasting of Cisco Discovery Protocol Version 2 advertisements is enabled by default on Cisco devices. To disable or reenable
this broadcasting, perform these tasks.
Disabling Cisco Discovery Protocol Version 2 Advertisements
Procedure
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
10
Purpose
Enters global configuration mode.
Specifies the frequency of transmission of Cisco Discovery
Protocol packets.
Specifies the time for which a receiving device should hold
information before discarding it.
Enters privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.