Fibar Group FGS-222 Operating Manual - Page 2

Browse online or download pdf Operating Manual for Switch Fibar Group FGS-222. Fibar Group FGS-222 2 pages. Double relay switch

Print Page

• 0 - DEACTIVATION - the device does not respond to alarm data

Parameter No. 14 - Switch type connector, you may choose

frames

between momentary and toggle switches.

• 1 - ALARM ON - the device turns on after detecting an alarm

Default value: 1

• 2 - ALARM OFF - the device turns off after detecting an alarm

• 3 - ALARM FLASHING - the device periodically changes its status

Options for changing the parameter:

to the opposite when it detects an alarm (lights on/off alternately)

0 - momentary switch

1 - toggle switch

Fibaro Double Relay Switch has two independent alarm groups (i.e.

each of its channels may respond in an individual way to received

alarm data-frames).

Parameter No. 15 - Operation of the Dimmer and Roller Shutter

Controller - enabling this option allows the user to dim

lighting/shut roller by associating Dimmer/Roller Shutter

VII Operating Fibaro Switch

Controller and holding or double press of double switch (only

mono-stable switch).

Default value: 0

Fibaro Switch may be operated using the following control

elements:

Available configuration parameters:

0 - Dimmer/Roller Shutter Controller control is not active

− any controller compatible with the system (e.g. Home Center

1 - Dimmer/Roller Shutter Controller control is active

controller)

− a mobile phone (e.g. iPhone and phones from other manufacturers

with appropriate software)

Parameter No. 16 - Saving the state of the device after a power

− tablet (such as iPad)

failure. Fibaro Switch returns to the last position saved before

− PC, using a web browser

a power failure.

− push-buttons connected to inputs S1 and S2

Default value: 1

− service button B, located inside the housing (activates learn mode)

Options for changing the parameter 0-1

VIII Procedures for malfunctions

0 - Fibaro Switch does not save the state after a power failure, it

returns to "off" position

1 - Fibaro Switch saves its state before power failure

The device does not respond to a pre-programmed transmitter:

• Make sure that the maximum range is not exceeded and the signal

Possibility to change the configuration of the following

path is not obstructed by metal surfaces such as metal cabinets, etc.

parameters [30 – 33, 40 - 43].

• Make sure the device is not in the programming mode, or repeat

0 - DEACTIVATION - the device does not respond to alarm data

the programming process.

• Or repeat the programming process.

frames

1 - ALARM RELAY ON - the device turns on after detecting an alarm

2- ALARM RELAY OFF - the device turns off after detecting an alarm

3 - ALARM FLASHING - the device periodically changes its status to

IX Guarantee

the opposite, when it detects an alarm within 10 min.

1. The Guarantee is provided by FIBAR GROUP Sp. z o.o.

(hereinafter "Manufacturer"), based in Poznan, ul. Lotnicza 1; 60-421

Parameter No. 30 - General Alarm, set for relay no. 1.

Poznan, entered in the register of the National Court Register kept

by the District Court in Poznań, VIII Economic Department of the

Default value: 3[byte] ALARM FLASHING

National Court Register, no. 370151, NIP 7811858097, REGON:

301595664.

Parameter No. 40 - General Alarm, set for switch no. 2.

2. The Manufacturer is responsible for equipment malfunction

resulting from physical defects (manufacturing or material) of the

Default value: 3[byte] ALARM FLASHING

Device for 12 months from the date of its purchasing.

3. During the Guarantee period, the Manufacturer shall remove any

Parameter No. 31 - Alarm of flooding with water, set for relay

defects, free of charge, by repairing or replacing (at the sole

no. 1.

discretion of the Manufacturer) any defective components of the

Device with new or regenerated components, that are free of

Default value: 2[byte] ALARM RELAY OFF

defects. When the repair impossible, the Manufacturer reserves the

right to replace the device with a new or regenerated one, which shall

be free of any defects and its condition shall not be worse than the

Parameter No. 41 - Alarm of flooding with water, set for relay

original device owned by the Customer.

no. 2.

4. In special cases, when the device cannot be replaced with the

Default value: 2[byte] ALARM RELAY OFF

device of the same type (e.g. the device is no longer available in the

commercial offer), the Manufacturer may replace it with a different

device having technical parameters similar to the faulty one. Such

Parameter No. 32 - Smoke, CO, CO2 Alarm. Set for relay no. 1.

activity shall be considered as fulfilling the obligations of the

Manufacturer. The Manufacturer shall not refund money paid for the

Default value: 3[byte] ALARM FLASHING

device.

5. The holder of a valid guarantee shall submit a guarantee claim

Parameter No. 42 - Smoke, CO, CO2 Alarm. Set for relay no. 2.

through the guarantee service. Remember: before you submit a

guarantee claim, contact our technical support using telephone or

Default value: 3[byte] ALARM FLASHING

e-mail. More than 50% of operational problems is resolved remotely,

saving time and money spent to initiating guarantee procedure. If

remote support is insufficient, the Customer shall fill the guarantee

Parameter No. 33 - Temperature Alarm, set for relay no. 1.

claim form (using our website - www.fibargroup.com) in order to

obtain claim authorization.

Default value: 1[byte] ALARM RELAY ON

When the guarantee claim form is submitted correctly, the Customer

shall receive the claim confirmation with an unique number (Return

Merchandise Authorization -RMA).

Parameter No. 43 - Temperature Alarm, set for relay no. 2.

6. The claim may be also submitted by telephone. In this case, the

Default value: 1[byte] ALARM RELAY ON

call is recorded and the Customer shall be informed about it by a

consultant before submitting the claim. Immediately after submitting

the claim, the consultant shall provide the Customer with the claim

Parameter No. 39 - Active flashing alarm time.

number (RMA-number).

Default value: 600

7. When the guarantee claim form is submitted correctly, a

Available configuration parameters: [1-65535][ms]

representative of the Authorised Guarantee Service (hereinafter as

"AGS") shall contact the Customer.

VI Additional Functionality

8. Defects revealed within the guarantee period shall be removed

not later than 30 days from the date of delivering the Device to AGS.

Operating alarm data frames

The guarantee period shall be extended by the time in which the

Fibaro system allows user to set response of devices to alarm

Device was kept by AGS.

situations

(response

data-frames ALARM_REPORT

and

SENSOR_ALARM_REPORT) Fibaro Double Relay Switch responds

9. The faulty device shall be provided by the Customer with complete

to the following types of alarms:

standard equipment and documents proving its purchase.

• General Purpose Alarm - GENERAL PURPOSE ALARM [0x00]

10. Parts replaced under the guarantee are the property of the

• Smoke Alarm - ALARM CO2 [0x02], ALARM CO [0x01], ALARM

Manufacturer. The guarantee for all parts replaced in the guarantee

SMOKE [0x03]

process shall be equal to the guarantee period of the original device.

• Water Flooding Alarm - ALARM WATER [0x05]

The guarantee period of the replaced part shall not be extended.

• Temperature Alarm - ALARM HEAT [0x04]

11. Costs of delivering the faulty device shall be borne by the

Alarm data-frames are sent by devices that are system sensors (e.g.,

Customer. For unjustified service calls, the Service may charge the

flood sensors, smoke detectors, motion detectors, etc.).

Customer with travel expenses and handling costs related to the

case.

The device may respond in the following manner to received

data-frames (settings are configured in configuration parameters,

see section V Configuration ):

12. AGS shall not accept a complaint claim only when:

• the Device was misused or the manual was not observed,

• the Device was provided by the Customer incomplete, without

accessories or nameplate,

• it was determined that the fault was caused by other reasons than

a material or manufacturing defect of the Device

• the guarantee document is not valid or there is no proof of

purchase,

13. The Manufacturer shall not be liable for damages to property

caused by defective device. The Manufacturer shall not be liable for

indirect, incidental, special, consequential or punitive damages, or

for any damages, including, inter alia, loss of profits, savings, data,

loss of benefits, claims by third parties and any property damage or

personal injuries arising from or related to the use of the Device.

14. The guarantee shall not cover:

• mechanical damages (cracks, fractures, cuts, abrasions, physical

deformations caused by impact, falling or dropping the device or

other object, improper use or not observing the operating manual);

• damages resulting from external causes, e.g.: flood, storm, fire,

lightning, natural disasters, earthquakes, war, civil disturbance, force

majeure, unforeseen accidents, theft, water damage, liquid leakage,

battery spill, weather conditions, sunlight, sand, moisture, high or low

temperature, air pollution;

• damages caused by malfunctioning software, attack of a computer

virus, or by failure to update the software as recommended by the

Manufacturer;

• damages resulting from: surges in the power and/or telecommuni-

cation network, improper connection to the grid in a manner

inconsistent with the operating manual, or from connecting other

devices not recommended by the Manufacturer.

• damages caused by operating or storing the device in extremely

adverse conditions, i.e. high humidity, dust, too low (freezing) or too

high ambient temperature. Detailed permissible conditions for

operating the Device are defined in the operating manual;

• damages caused by using accessories not recommended by the

Manufacturer

• damages caused by faulty electrical installation of the Customer,

including the use of incorrect fuses;

• damages caused by Customer's failure to provide maintenance and

servicing activities defined in the operating manual;

• damages resulting from the use of spurious spare parts or

accessories improper for given model, repairing and introducing

alterations by unauthorized persons;

• defects caused by operating faulty Device or accessories.

15. The scope of the guarantee repairs shall not include periodic

maintenance and inspections, in particular cleaning, adjustments,

operational checks, correction of errors or parameter programming

and other activities that should be performed by the user (Buyer).

The guarantee shall not cover natural wear and tear of the Device

and its components listed in the operating manual and in technical

documentation as such elements have a defined operational life.

16. If a defect is not covered by the guarantee, the Manufacturer

reserves the right to remove such defect at its sole discretion,

repairing the damaged or destroyed parts or providing components

necessary for repair or replacement.

17. This guarantee shall not exclude, limit or suspend the Customer

rights when the provided product is inconsistent with the purchase

agreement.

This Device may be used with all devices

certified with Z-Wave certificate and should be

compatible with such devices produced by

other manufacturers.

Any device compatible with Z-Wave may be added

to Fibaro system.

FIBARGROUP

FIBARO

In case of any technical questions contact customer service centre

in your country.