FIBARO FGMS-001 Operating Manual - Page 7
Browse online or download pdf Operating Manual for Security Sensors FIBARO FGMS-001. FIBARO FGMS-001 11 pages. Motion sensor
Also for FIBARO FGMS-001: Operating Manual (20 pages), Operating Manual (2 pages)
Print Page
12
#8: Advanced parameters
The Motion Sensor allows to customize its operation to user's needs.
The settings are available in the FIBARO interface as simple options
that may be chosen by selecting the appropriate box.
In order to configure the Motion Sensor (using the home Center con-
troller):
1. Go to the device options by clicking the icon:
2. Select the „Advanced" tab.
Wake up interval
Available settings: 1-65535 (1-65535 seconds)
Default setting: 7200 (every 2 hours)
The Motion Sensor will wake up after each defined time interval and
always try to connect with the main controller. After a successful com-
munication attempt, the sensor will update configuration parame-
ters, associations and settings and will go into standby mode. After
failed communication attempt (e.g. lack of Z-Wave range) the device
will go into standby mode and retry to establish connection with the
main controller after the next time interval.
Wake up may be performed manually by a single B-button click.
Longer time interval means less frequent communication and thus a
longer battery life.
1. Motion detection - sensitivity
The lower the value, the more sensitive the PIR sensor is.
Available settings: 8-255
Default setting:
2. Motion detection - blind time
i
NOTE
PIR sensor is "blind" (insensitive) to motion after last detection for the
Blind time should be
amount of time specified in this parameter.
shorter that the time
Shorter time periods allow to detect motion more frequently, but the
period set in parame-
ter 6 (alarm cancella-
battery will be drained faster.
tion delay).
Available settings: 0-15 (0.5-8 seconds, time [s] = 0.5 x (value+1))
Default setting:
ADvAnCED PARAMETERS
15
2 [bytes]
Parameter size:
3
1 [byte]
Parameter size:
3. Motion detection - pulse counter
This parameter determines the number of moves required for the PIR
sensor to report motion. The higher the value, the less sensitive the
PIR sensor is.
It is not recommended to modify this parameter settings!
Available settings: 0 - 1 pulse
1 - 2 pulses
2 - 3 pulses
3 - 4 pulses
Default setting:
1 (2 pulses)
Parameter size:
4. Motion detection - window time
Period of time during which the number of moves set in parameter
3 must be detected in order for the PIR sensor to report motion. The
higher the value, the more sensitive the PIR sensor is.
It is not recommended to modify this parameter setting!
Available settings: 0 - 4 seconds
1 - 8 seconds
2 - 12 seconds
3 - 16 seconds
Default setting:
2 (12 seconds) Parameter size:
6. Motion detection - alarm cancellation delay
Time period after which the motion alarm will be cancelled in the
main controller and associated devices.
Any motion detected during this period resets the timer.
Available settings: 1-32767 (in seconds)
Default setting:
30 (30s)
Parameter size:
8. Motion detection - operating mode
This parameter determines in which part of day the PIR sensor will be
active.
This parameter influences only the motion reports and associations.
Tamper, light intensity and temperature measurements will be still
active, regardless of this parameter settings.
Available settings: 0 - PIR sensor always active
1 - PIR sensor active during the day only
2 - PIR sensor active during the night only
0
Default setting:
Parameter size:
13
1 [byte]
1 [byte]
2 [bytes]
1 [byte]
ADvAnCED PARAMETERS