Digisol RANGER SERIES Quick Installation Manual - Page 10
Browse online or download pdf Quick Installation Manual for Wireless Access Point Digisol RANGER SERIES. Digisol RANGER SERIES 12 pages. 2.4ghz ge outdoor access point with poe
Also for Digisol RANGER SERIES: Quick Installation Manual (16 pages)
Print Page
Press OK.
Type ipconfig to get the IP of default gateway.
Type "ping 192.168.123.254". Assure that you ping the correct IP
Address assigned to the load balancing Router. It will show four
replies if you ping correctly.
Ensure that your Ethernet Adapter is working, and that all network
drivers are installed properly. Network adapter names will vary
depending on your specific adapter. The installation steps listed
below are applicable for all network adapters.
Go to Start > Right click on "My Computer" > Properties.
Select the Hardware Tab.
Click Device Manager.
Double-click on "Network Adapters".
Right-click on Wired Card bus Adapter or your specific network
adapter.
Select Properties to ensure that all drivers are installed properly.
Look under Device Status to see if the device is working properly.
Click "OK".
10