Sharp CD-DK890N Operation Manual - Page 35

Browse online or download pdf Operation Manual for Stereo System Sharp CD-DK890N. Sharp CD-DK890N 44 pages. Mini component system
Also for Sharp CD-DK890N: Quick Start Manual (2 pages)

Print Page
Sharp CD-DK890N Operation Manual
6
Within 5 seconds, press the
Recording is started from the selected disc. When the
playback of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.
To stop recording:
Press the
(TAPE ) button.
The disc and tape will stop.
To perform programmed recording:
1 Program discs and tracks (see page 25).
2 Press the
button.
3 Press the
/
(TAPE
) button to start recording.
To stop recording:
Press the
(TAPE ) button.
The disc and tape will stop.
Recording from the radio
1
Tune in to the desired station (see page 30).
2
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the
button.
Recording will be paused.
4
Press the
/
(TAPE
To interrupt recording:
Press the
button.
To resume recording, press the
To stop recording:
Press the
(TAPE ) button.
Note:
If you hear a whistling noise while recording an AM station, move the
AM loop antenna.
/
button to start recording.
) button to start recording.
/
(TAPE
) button.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette
compartment. Insert a blank
tape into the TAPE 2 cassette
compartment.
It is recommended that the recording tape is the same length as
the master tape.
3
Press the TAPE (1
2) button until "TAPE 1" appears on
the display.
4
Press the
button.
Recording will be paused.
5
Press the
/
(TAPE
To stop dubbing:
Press the
(TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
Erasing recorded tapes
1 Load the tape to be erased into the TAPE 2 cassette
compartment with the side to be erased facing toward you.
2 Press the TAPE (1
2) button until "TAPE 2" appears on the
display.
3 Press the
button.
4 Press the
/
(TAPE
) button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
5
CD
4
3
PRESET
2
PRESET
1
TUNING
VOL.
TUNING
— VOL.
PHONES
TAPE 1
TAPE 2
) button to start dubbing.
CD-DK890N
35