Sharp AR-M208 Key Operator's Manual - Page 16

Browse online or download pdf Key Operator's Manual for All in One Printer Sharp AR-M208. Sharp AR-M208 24 pages. Digital laser copier/ printer
Also for Sharp AR-M208: Service Manual (32 pages)

Print Page

KEY OPERATOR PROGRAMS

Preheat Mode

Preheat mode functions to reduce the power consumption by lowering the temperature of the fusing

unit to a programmed level once a programmed length of time has elapsed without any copier operation

after the last copy of a run is made or power is turned on. The preheat mode will help lower the user's

electricity bill, reduce waste of natural resources, and cut down on environmental pollution. The

programmed time is set to the factory default of 15 minutes as shipped from the factory. The default

time can be changed optionally within the prescribed range of time. We suggest you set the most

appropriate time according to your usage pattern.

The interval can be set to 1, 2, 5, 10, 15, 30, 60, 120 or 240 minutes.

When "PREHEAT MODE" is selected and the OK key is pressed, the following display will appear.

Select the desired time interval using the

Press the OK key.

Time Out Setting

If a copy job is started while a print or fax job is being run, the print or fax job will be interrupted. This

program is used to adjust the time that elapses before the print or fax job resumes after the copy job is

completed. If a print or fax job is sent to this machine while a copy job is being run, printing of the print

or fax job will start when the programmed time elapses after the copy job is completed. The time can be

set to 0, 10, 30 or 60 seconds. If 0 is set, the print or fax job will resume immediately after a copy run

has finished. (A facsimile expansion kit must be installed to run a fax job.)

When "TIME OUT SETTING" is selected and the OK key is pressed, the following display will appear.

Select the desired time using the

Press the OK key.

PREHEAT MODE

min.

(1~240)

TIME OUT SETTING

sec.

(0~60)

and

keys.