Sharp AR-M208 Key Operator's Manual - Page 17

Browse online or download pdf Key Operator's Manual for All in One Printer Sharp AR-M208. Sharp AR-M208 24 pages. Digital laser copier/ printer
Also for Sharp AR-M208: Service Manual (32 pages)

Print Page

ENABLE/DISABLE

The programs of this category are used to enable or disable some functions. These programs can be

set or canceled by using the

highlighting the desired program, and then pressing the OK key.

Disable Auto Paper Selection

This program is used to prevent automatic paper selection. When disabled, the copier will not

automatically select a paper tray containing paper that matches the size of the original placed on the

platen glass or in a RSPF.

To disable auto paper selection, highlight "DISABLE AUTO PAPER

SELECTION" and press the OK key to display a check mark in the check

box.

To restore this function, select this program and press the OK key again to

clear the check mark in the check box.

Disable Auto Tray Switching

This program prevents automatic switching between the paper trays. If automatic tray switching is

enabled, when paper runs out during copying, any tray with paper of the same size in the same

orientation will be automatically selected and copying will continue.

To disable auto tray switching, highlight "DISABLE AUTO TRAY

SWITCHING" and press the OK key to display a check mark in the check

box.

To restore this function, select this program and press the OK key again to

clear the check mark in the check box.

Disable Job Program Changing

This program is used to prevent stored programs from being replaced or deleted. If this program is set,

storing of job programs is also disabled.

To prevent job programs stored in memory from being replaced or deleted,

highlight "DISABLE JOB PRG. CHANGING" and press the OK key to

display a check mark in the check box.

To allow replacement/deletion, select this program and press the OK key

again to clear the check mark in the check box.

Disable Center Tray Counting

In the default setting, when copies or printed sheets are delivered to the center tray of the copier, the

number of sheets delivered will be counted. When counting is enabled, the copier will automatically

stop when the count has reached the limit. This program can be used to disable counting in the center

tray of the copier.

To disable counting, highlight "DISABLE CENTER TRAY COUNTING" and

press the OK key to display a check mark in the check box.

To enable counting, select this program and press the OK key again to

clear the check mark in the check box.

and

keys to highlight "ENABLE/DISABLE", pressing the OK key,

KEY OPERATOR PROGRAMS