Sharp AR-M208 Service Manual - Page 25

Browse online or download pdf Service Manual for All in One Printer Sharp AR-M208. Sharp AR-M208 32 pages. Digital laser copier/ printer
Also for Sharp AR-M208: Key Operator's Manual (24 pages)

Print Page
Display
Content
items
1st cassette
1:TRAY1
Option cassette
2:OPTION
Manual feed
3:MANUAL
Back print
4:DUPLEX
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
50-6
Purpose
Adjustment
Function
Used to adjust the print image position (top margin) on
(Purpose)
print paper in the copy mode. (SPF/RSPF)
Item
Picture quality
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen)
(Input screen)
Sim50-6 SPF EDGE
1:SIDE1
50
2:SIDE2
50
3:END EDGE
36
1/3 [ 1- 99]
50
Display items
Surface original scan start
1:SIDE1
position adjustment value
Back original scan start
2:SIDE2
position set value
Rear edge void
3:END EDGE
adjustment value (SPF)
Surface image loss
4:LOSS(SIDE1)
quantity set value
Back image loss quantity
5:LOSS(SIDE2)
set value
6:REARLOS(SIDE1) Surface rear edge image
loss quantity set value
7:REARLOS(SIDE2) Back rear edge image
loss quantity set value
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
50-10
Purpose
Adjustment
Function
Used to adjust the print image center position.
(Purpose)
(Adjustment can be made for each paper feed
section.)
Section
Image processing (ICU)
Item
Picture quality
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
Setting
Default
Remark
range
0-99
53
Tray selection:
1st cassette is
specified.
1-99
Tray selection:
2nd cassette is
specified.
Tray selection:
Manual feed
cassette is
specified.
Tray selection:
Made by user.
Image position
(Executing screen)
Setting
Content
Default
range
1-99
1-99
1-99
1-5
1-5
1-5
1-5
Image position
AR-M208 SIMULATION 8 - 11
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen)
Sim50-10 PRT.CENTER
1:BYPASS
2:TRAY1
3:TRAY2
1/2
Display items
1:BYPASS
2:TRAY1
3:TRAY2
4:TRAY3
5:TRAY4
6:DUPLEX
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
51
51-1
50
Purpose
Adjustment
Function
Used to adjust the OPC drum separation pawl ON
50
(Purpose)
time.
Section
Image process (Photoconductor/Developing/Transfer/
36
Cleaning)
Item
Operation
3
Operation/procedure
Enter the adjustment value with the 10-key and press the [OK] key, and
3
the entered value is registered.
(Initial screen)
3
Sim51-1 D/F TIMING
3
1:600dpi
2:1200dpi
Display items
1:600dpi
2:1200dpi
51-2
Purpose
Adjustment
Function
Used to adjust the contact pressure of paper onto the
(Purpose)
resist roller in each section (copier paper feed section,
duplex paper feed section, SPF paper feed section).
(When the print image position varies greatly for the
paper or when a lot of paper jam troubles occur, the
adjustment is required.)
Section
Paper transport (Discharge/Switchback/Transport)
Item
Operation
(Input screen)
(Executing screen)
50
50
50
50
Setting
Content
Default
range
Manual feed
1-99
50
1st cassette
2nd cassette
3rd cassette
4th cassette
Back print
(Input screen)
Sim51-1 D/F TIMING
2:1200dpi
50
50
50
[ 1- 99]
50
2
Setting range
Default
1-99
50
Disabled
Remark
Tray selection:
Manual feed
cassette is
specified.
Tray selection:
1st cassette is
specified.
Tray selection:
2nd cassette is
specified.
Tray selection:
3rd cassette is
specified.
Tray selection:
4th cassette is
specified.
Tray selection:
Made by user.