Sharp AR-M208 Service Manual - Page 27

Browse online or download pdf Service Manual for All in One Printer Sharp AR-M208. Sharp AR-M208 32 pages. Digital laser copier/ printer
Also for Sharp AR-M208: Key Operator's Manual (24 pages)

Print Page

[7-seg LED display]

1: Self print (2-by-4) mode

2: Grid print mode

Pressing the [START] key makes a print by 2 by 4 mode. After comple-

tion of printing, the menu returns to the initial menu.

Pressing the [CA] key cancels the simulation mode.

(Input screen)

(Executing screen)

67-11

Purpose

Setting

Function (Purpose)

Used to set the Select-IN signal.

Operation/procedure (Pattern 1)

Enter the adjustment value with the 10-key and press the [OK] key, and

the entered value is registered.

Sim67-11 SELECT-IN

SELECT-IN SIGNAL 0

(0:ON 1:OFF)

[ 0- 1]

Setting range

0-1

Default

* Execution is inhibited until GDI or PCL board is securely installed.

(Because the board is detected by the software.)

Note: Executable only when the PCL is installed.

67-14

Function (Purpose)

Used to check write/comparison of flash

programs.

Operation/procedure

Download PCL.

Pressing the [OK] key displays "Please Send Data" "Ready" and the

data is sent from the PC under the MS-DOS command of FCOPY and

the file name.

Used to overwrite and check the flash device while displaying its pro-

cess status.

After completion, the result is displayed.

(It takes a little time to display READY.)

(1)

(2)

Sim67-14 FLASH D/L

PRESS OK KEY

Please Send Data

READY

(Normal end screen)

(Abnormal end screen)

Sim67-14 FLASH D/L

COMPLETE

FAILED

(3)

Sim67-14 FLASH D/L

PROGRAM

RECEIVE

AR-M208 SIMULATION 8 - 13

(Flash Device)

(Processing state)

PROGRAM

RECEIVE

BOOTROM

ERASE

PS KANJI FONT

WRITE

ESC/P KANJI FONT

VERIFY

OPTION FONT

Press the [CA] key to cancel the simulation and reset.

* Execution is inhibited until GDI or PCL board is securely installed.

(Because the board is detected by the software.)

Note: Executable only when the PCL is installed.

67-17

Function (Purpose) Used to clear NVRAM.

Operation/procedure (Pattern 7)

Pressing the [OK] key displays the confirmation message.

Press the [OK] key again to clear. Press the [BACK] key to interrupt

clearing.

If there is no abnormality after Clear operation, "COMPLETE" is dis-

played. If there is any abnormality, "ERROR" is displayed.

(Initial screen)

(Process check screen) (Executing screen)

Sim67-17 NVRAM CLR.

NVRAM CLEAR

ARE YOU SURE?

PRESS OK KEY

(Normal end screen)

(Abnormal end screen)

Sim67-17 NVRAM CLR.

NVRAM CLEAR

COMPLETE

ERROR

PRESS OK KEY

* Execution is inhibited until GDI or PCL board is securely installed.

(Because the board is detected by the software.)

Note: Executable only when the PCL is installed.

67-18

Function (Purpose) Used to clear the data area for FLASH ROM

Network Scanner Application.

Operation/procedure (Pattern 7)

Pressing the [OK] key displays the confirmation message.

Press the [OK] key again to clear. Press the [BACK] key to interrupt

clearing.

If there is no abnormality after Clear operation, "COMPLETE" is dis-

played. If there is any abnormality, "ERROR" is displayed.

(Initial screen)

(Process check screen) (Executing screen)

Sim67-18 APP. CLR.

APP. DATA CLEAR

ARE YOU SURE?

PRESS OK KEY

(Normal end screen)

(Abnormal end screen)

Sim67-18 APP. CLR.

APP. DATA CLEAR

COMPLETE

ERROR

PRESS OK KEY

* Execution is inhibited until GDI or PCL board is securely installed.

(Because the board is detected by the software.)

Note: Executable only when the PCL is installed.

Sim67-17 NVRAM CLR.

NVRAM CLEAR

NOW DOING...

Sim67-18 APP. CLR.

APP. DATA CLEAR

NOW DOING...