Sharp AR-M351N Key Operator's Manual - Page 15

Browse online or download pdf Key Operator's Manual for All in One Printer Sharp AR-M351N. Sharp AR-M351N 20 pages. Digital printer
Also for Sharp AR-M351N: Brochure & Specs (7 pages)

Print Page

NOTES

G About stopped jobs

Printing of received faxes and Internet-Faxes and

transmission of stored fax jobs will automatically

resume after the machine restarts.

For jobs other than the above (copy jobs, print

jobs, document filing print jobs, etc.), the job

information is not retained and thus the stopped

job must be executed again manually (for

example, the original for a copy job must be

placed again and the copy operation repeated).

G Operation after optimization starts

Until optimization finishes (or the [CANCEL] key is

touched to cancel optimization),

• The operation panel cannot be used, with the

exception of the [CANCEL] key.

• Operation from the Web page is not possible.

• Faxes and Internet-Faxes cannot be received.

• Print jobs will not be accepted.

• The power will not turn off even if the power

switch is switched off.

• Auto power shut-off mode will not activate even

if the set time elapses. (Preheat mode will

activate.)

List print

This program is used to print lists and reports that can

only be printed from the key operator programs.

• Touch the [KEY OPERATOR PROGRAMS LISTS]

key to print one of the following groups:

Copy, printer, fax/image send, document filing,

general, security, all program lists

• Touch a key other than the [KEY OPERATOR

PROGRAMS LISTS] key to begin printing a list or

report.

Key operator code change

This program is used to change the key operator code

that must be entered to configure the key operator

programs. When the machine is first used, the key

operator should change the key operator code that was

set at the factory to the desired 5-digit code. Only one

key operator code can be programmed.

The factory default setting for the key operator code is

00000.

Product key

Use these programs to enter the product keys for the

following options.

PS3 expansion kit

This program is used to enter the product key for the

PS3 expansion kit (this allows the machine to be used

as a PostScript compatible printer).

Ask your dealer for the product key.

Network scanner expansion kit

This program is used to enter the product key for the

network scanner expansion kit.

Ask your dealer for the product key.

E-mail alert and status

This program is used to enter the product key for

E-MAIL ALERT AND STATUS, which enables

customer product support via a network system.

Ask your dealer for the product key.

Serial number

This program is used to check the serial number of the

machine.

Initialize and/or store settings

These programs are used to return the key operator

programs to the factory default settings, to store the

current key operator program settings, and to restore

stored key operator program settings. (Note that this

also includes printer configuration settings.)

The following programs are available:

G Restore factory defaults

G Store current configuration

G Restore configuration

Restore factory defaults

This program is used to return the key operator program

settings (including the printer configuration settings) to

the factory default settings. If you need a record of the

settings prior to restoration of the default settings, print

the key operator program list "List print" (page 13).

NOTE

After this program is set, exit the key operator

program, turn off the power switch, and then turn on

the power switch again after at least 3 seconds. The

program will be effective at this time.

Store current configuration

This program is used to return the key operator program

settings (including the printer configuration settings) to

the factory default settings. The stored settings will

remain in memory even if the power switch is turned off.

To read the stored settings, use the following "Restore

configuration" program.

Restore configuration

This program is used to read the configuration that was

stored using the "Store current configuration" program

and restore it as the current configuration.

The currently set configuration will change to the

configuration read from memory.

NOTE

A confirmation message will appear at the end of the

setting procedure of programs marked by *1. If you need

to cancel execution of the program, touch the [NO] key.

GENERAL PROGRAMS