Shimano BR-IM35 Dealer's Manual - Page 14
Browse online or download pdf Dealer's Manual for Bicycle Accessories Shimano BR-IM35. Shimano BR-IM35 27 pages. Hub roller brake
Print Page
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. Installation
- 3. List of Tools to be Used
- 3. Installation of the Lever
- 3. Installing the INTER M Brake to the Hub Body
- 3. Installation of the Hub to the Frame
- 3. Installation of the Brake Cable
- 4. Adjustment
- 4. Adjusting the Brake Cable
- 5. Maintenance
- 5. Applying Grease
INSTALLATION
Installation of the hub to the frame
(O)
(N)
8
Fix the brake arm (M) securely to the
chainstay (N) with the brake arm clip
(O).
Check that the brake arm is securely
fastened to the chainstay by the brake
arm clip.
If it is not installed correctly, braking
performance will suffer.
(M)
14
(M)
Brake arm
(N)
Chainstay
(O)
Brake arm clip
Tightening torque
2 - 3 N·m
NOTE
If excessive force is applied to the brake
arm to secure it, the wheel will make noise
and become difficult to turn.
Make sure that you don't apply excessive
force when installing.
•
When installing the arm clip, securely
tighten the clip bolt while holding the
clip nut with a 10 mm spanner.
•
After installing the brake arm clip, check
that the clip bolt protrudes about 2 - 3 mm
(4 mm for BR-IM31/35) from the surface of
the clip nut.
Brake arm
Brake arm clip
Clip nut
Clip screw
(M6 × 16 mm)
About 2 - 3 mm