Shimano BR-IM35 Dealer's Manual - Page 17
Browse online or download pdf Dealer's Manual for Bicycle Accessories Shimano BR-IM35. Shimano BR-IM35 27 pages. Hub roller brake
Print Page
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. Installation
- 3. List of Tools to be Used
- 3. Installation of the Lever
- 3. Installing the INTER M Brake to the Hub Body
- 3. Installation of the Hub to the Frame
- 3. Installation of the Brake Cable
- 4. Adjustment
- 4. Adjusting the Brake Cable
- 5. Maintenance
- 5. Applying Grease
INSTALLATION
Installation of the brake cable
4
5
(J)
6
(M)
7
(O)
8
(P)
To be continued on next page
(G)
Align the red mark on the inner cable
fixing washer (H) so that it faces in the
direction of the groove in the winder
unit (G), and then insert the inner
cable fixing bolt unit (I) and push it
(H)
into the groove in the winder unit as
far as it will go.
(I)
(c)
Route the inner cable (J) along the
groove in the winder unit (K).
(K)
Insert the outer holder unit (M) into
the hole of the brake arm (L) from
underneath and slide it to the lower
section of the hole.
(L)
(N)
After checking that the outer holder
unit (O) is inserted as far as it will go
into the brake arm hole, install the
inner end cap (N).
Then, set the inner end cap so that it
does not touch the fin or the spokes.
Turn the cable adjustment barrel (P) to
tighten the inner cable.
(c)
Insert the inner cable fixing bolt
unit and push it into the groove
in the winder unit as far as it will
go.
17
(G)
Groove in the winder unit
(H)
Red mark on inner cable fixing
washer
(I)
Inner cable fixing bolt unit
(J)
Inner cable
(K)
Groove in the winder unit
(L)
Brake arm
(M)
Outer holder unit
(N)
Inner end cap
(O)
Outer holder unit
(P)
Cable adjustment barrel