Digital Barriers EDGEVIS IP Series Hardware Installation Manual - Page 3

Browse online or download pdf Hardware Installation Manual for Media Converter Digital Barriers EDGEVIS IP Series. Digital Barriers EDGEVIS IP Series 13 pages.

Print Page

EDGEVIS HD-IP200 HARDWARE INSTALLATION

SAFETY NOTES

The EdgeVis Encoder has been designed for use in indoor environments. It can operate in temperatures from 0˚C to

+50˚C whilst powered from 12V DC.

All deployments of an HD-IP200 encoder unit should ensure that the device is not mounted:

•

Within explosive zones

•

Within 0.5m of a powered transmitter and/or receiver antenna

•

Within the engine bay/compartment of a vehicle

•

Within 1m of a vehicle fuel fill point (direct line of sight)

WARNING: The HD-IP200 Encoder has been designed to operate from a 12V DC supply. Do not connect it directly

to mains power outlet. Use the AC/DC adapter supplied with the unit.

The following precautions must be taken to avoid damage to the unit:

•

DO NOT CONNECT DIRECTLY TO THE MAINS SUPPLY

•

Always ensure the supply is within the specified voltage range and employ

suitable filtering if voltage spikes are likely

•

Do not reverse the polarity of the DC power supply. It will cause irreparable

damage to the HD-IP200

•

Always provide a common ground between the HD-IP200 unit and all

connected equipment

ISSUED: 17 MARCH 2022

PAGE 3