Digital Barriers EDGEVIS IP Series Donanım Kurulum Kılavuzu - Sayfa 3
Medya Dönüştürücü Digital Barriers EDGEVIS IP Series için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Digital Barriers EDGEVIS IP Series 13 sayfaları.
Sayfayı YazdırEDGEVIS HD-IP200 HARDWARE INSTALLATION
SAFETY NOTES
The EdgeVis Encoder has been designed for use in indoor environments. It can operate in temperatures from 0˚C to
+50˚C whilst powered from 12V DC.
All deployments of an HD-IP200 encoder unit should ensure that the device is not mounted:
•
Within explosive zones
•
Within 0.5m of a powered transmitter and/or receiver antenna
•
Within the engine bay/compartment of a vehicle
•
Within 1m of a vehicle fuel fill point (direct line of sight)
WARNING: The HD-IP200 Encoder has been designed to operate from a 12V DC supply. Do not connect it directly
to mains power outlet. Use the AC/DC adapter supplied with the unit.
The following precautions must be taken to avoid damage to the unit:
•
DO NOT CONNECT DIRECTLY TO THE MAINS SUPPLY
•
Always ensure the supply is within the specified voltage range and employ
suitable filtering if voltage spikes are likely
•
Do not reverse the polarity of the DC power supply. It will cause irreparable
damage to the HD-IP200
•
Always provide a common ground between the HD-IP200 unit and all
connected equipment
ISSUED: 17 MARCH 2022
PAGE 3