Siemens SIMATIC ET 200SP HA Equipment Manual - Page 22

Browse online or download pdf Equipment Manual for Industrial Equipment Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 44 pages. Distributed i/o devices busadapter for distributed i/o
Also for Siemens SIMATIC ET 200SP HA: Manual (32 pages), Manual (50 pages), Manual (34 pages), Manual (38 pages), Equipment Manual (50 pages), Equipment Manual (38 pages), Equipment Manual (46 pages), Equipment Manual (42 pages), Equipment Manual (44 pages), Equipment Manual (36 pages), Equipment Manual (38 pages)

Print Page

Installation

4.5 BusAdapter BA 2xRJ45

Installing BusAdapter BA 2×RJ45

Note

The figure below is a basic representation using the ET 200SP HA as an example; it is also valid

for other distributed I/O devices.

①

②

③

④

Figure 4-5

Note

Configuration guidelines for modules with PROFINET IO interfaces

You may only operate the modules with PROFINET IO interfaces in LANs (Local Area

Networks) if all connected nodes are equipped with SELV/PELV power supplies (or have

equivalent protection).

A data transfer terminal that guarantees this level of safety must be used for the interface to the

WAN (Wide Area Network).

Additional information

Pin assignment of the RJ45 connection plug (Page 31)

BusAdapter BA 2×RJ45

RJ45 connector

PROFINET IO cable

Interface module

Connecting a PROFINET IO cable to the device via BusAdapter BA 2×RJ45

BusAdapter for Distributed I/O

Equipment Manual, 09/2019, A5E39261458-AB