Siemens SIMATIC ET 200SP HA Equipment Manual - Page 21

Browse online or download pdf Equipment Manual for Industrial Equipment Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 44 pages. Distributed i/o devices busadapter for distributed i/o
Also for Siemens SIMATIC ET 200SP HA: Manual (32 pages), Manual (50 pages), Manual (34 pages), Manual (38 pages), Equipment Manual (44 pages), Equipment Manual (50 pages), Equipment Manual (38 pages), Equipment Manual (46 pages), Equipment Manual (42 pages), Equipment Manual (36 pages), Equipment Manual (38 pages)

Print Page

Description

Both redundant modules measure simultaneously and independently in the process. Both

redundant modules form diagnostics, interrupts and process values.

6.3.3

Diagnostics short-circuit to L+

Definition

When the digital output is enabled, you can enable diagnostics that report a digital output short

circuit to L+.

6.3.4

Definition

When the digital output is enabled, you can enable diagnostics that report a digital output short

circuit to M.

A short circuit to M is only recognized when the output is switched on (output value = 1).

Note

Short-circuit signal

If the output is disabled with pending short circuit (output value = 0), the diagnostics Short-

circuit to M is reset.

6.3.5

Definition

With activated wire break checking, the diagnostics are enabled when the line is from the

actuator is interrupted.

6.3.6

Definition

Enable for wire break check. The I/O module can only detect a wire break if wire-break is

activated.

DQ 16x24VDC/0.5A

Equipment Manual, 10/2021, A5E39265993-AD

6.3 Explanation of the module/channel parameters

Parameters