Siemens SIMATIC ET 200SP HA Ekipman Kılavuzu - Sayfa 21

Endüstriyel Ekipmanlar Siemens SIMATIC ET 200SP HA için çevrimiçi göz atın veya pdf Ekipman Kılavuzu indirin. Siemens SIMATIC ET 200SP HA 44 sayfaları. Distributed i/o devices busadapter for distributed i/o
Ayrıca Siemens SIMATIC ET 200SP HA için: Manuel (32 sayfalar), Manuel (50 sayfalar), Manuel (34 sayfalar), Manuel (38 sayfalar), Ekipman Kılavuzu (44 sayfalar), Ekipman Kılavuzu (50 sayfalar), Ekipman Kılavuzu (38 sayfalar), Ekipman Kılavuzu (46 sayfalar), Ekipman Kılavuzu (42 sayfalar), Ekipman Kılavuzu (36 sayfalar), Ekipman Kılavuzu (38 sayfalar)

Sayfayı Yazdır
Siemens SIMATIC ET 200SP HA Ekipman Kılavuzu
Description
Both redundant modules measure simultaneously and independently in the process. Both
redundant modules form diagnostics, interrupts and process values.
6.3.3

Diagnostics short-circuit to L+

Definition
When the digital output is enabled, you can enable diagnostics that report a digital output short
circuit to L+.
6.3.4

Diagnostics, Short-circuit to ground

Definition
When the digital output is enabled, you can enable diagnostics that report a digital output short
circuit to M.
A short circuit to M is only recognized when the output is switched on (output value = 1).
Note
Short-circuit signal
If the output is disabled with pending short circuit (output value = 0), the diagnostics Short-
circuit to M is reset.
6.3.5

Diagnostics, Wire break

Definition
With activated wire break checking, the diagnostics are enabled when the line is from the
actuator is interrupted.
6.3.6

Wire-break check

Definition
Enable for wire break check. The I/O module can only detect a wire break if wire-break is
activated.
DQ 16x24VDC/0.5A
Equipment Manual, 10/2021, A5E39265993-AD
6.3 Explanation of the module/channel parameters
Parameters
21