Siemens SIMATIC ET 200SP HA Equipment Manual - Page 35

Browse online or download pdf Equipment Manual for Industrial Equipment Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 44 pages. Distributed i/o devices busadapter for distributed i/o
Also for Siemens SIMATIC ET 200SP HA: Manual (32 pages), Manual (50 pages), Manual (34 pages), Manual (38 pages), Equipment Manual (44 pages), Equipment Manual (50 pages), Equipment Manual (38 pages), Equipment Manual (46 pages), Equipment Manual (42 pages), Equipment Manual (36 pages), Equipment Manual (38 pages)

Print Page

Note

You can avoid the derating by deactivating channels 8 to 16.

Test current for signal state "0"

Note

If the "Check for wire break" parameter is activated, a test current flows, even if the signal state

for the output is "0" (singular mode: Approx. 700 μA, redundant operation: approx. 1.4 mA).

Cycle time

The cycle time describes the time slice in which signals from the inputs are acquired and

processed. The cycle time of the I/O module is 1 ms.

DQ 16x24VDC/0.5A

Equipment Manual, 10/2021, A5E39265993-AD

Technical specifications