Siemens SIMATIC ET 200SP HA Instrukcja obsługi sprzętu - Strona 35

Przeglądaj online lub pobierz pdf Instrukcja obsługi sprzętu dla Urządzenia przemysłowe Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 44 stron. Distributed i/o devices busadapter for distributed i/o
Również dla Siemens SIMATIC ET 200SP HA: Podręcznik (32 strony), Podręcznik (50 strony), Podręcznik (34 strony), Podręcznik (38 strony), Instrukcja obsługi sprzętu (44 strony), Instrukcja obsługi sprzętu (50 strony), Instrukcja obsługi sprzętu (38 strony), Instrukcja obsługi sprzętu (46 strony), Instrukcja obsługi sprzętu (42 strony), Instrukcja obsługi sprzętu (36 strony), Instrukcja obsługi sprzętu (38 strony)

Siemens SIMATIC ET 200SP HA Instrukcja obsługi sprzętu
Note
You can avoid the derating by deactivating channels 8 to 16.
Test current for signal state "0"
Note
If the "Check for wire break" parameter is activated, a test current flows, even if the signal state
for the output is "0" (singular mode: Approx. 700 μA, redundant operation: approx. 1.4 mA).
Cycle time
The cycle time describes the time slice in which signals from the inputs are acquired and
processed. The cycle time of the I/O module is 1 ms.
DQ 16x24VDC/0.5A
Equipment Manual, 10/2021, A5E39265993-AD
Technical specifications
35