Siemens SIMATIC NET Operating Instructions Manual - Page 12

Browse online or download pdf Operating Instructions Manual for Industrial Equipment Siemens SIMATIC NET. Siemens SIMATIC NET 32 pages. Network components bus terminal
Also for Siemens SIMATIC NET: Operating Instructions Manual (29 pages), Operating Instructions Manual (50 pages), Operating Instructions Manual (28 pages), Assembly Instructions Manual (6 pages), Product Information (6 pages), Installation Manual (40 pages), Installation Manual (50 pages), Installation Manual (40 pages), Reference Manual (14 pages), Installation Manual (34 pages), Installation Manual (48 pages)

Print Page

Installation

2.1 Important notes on using the device

NOTICE

Improper mounting

Improper mounting may damage the device or impair its operation.

• Before mounting the device, always ensure that there is no visible damage to the device.

• Mount the device using suitable tools. Observe the information in the respective section

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

EXPLOSION HAZARD

Do not open the device when the supply voltage is turned on.

EXPLOSION HAZARD

Replacing components may impair suitability for Class 1, Division 2 or Zone 2.

The device is intended for indoor use only.

The device may only be operated in an environment of contamination class 1 or 2 (see EN/IEC

60664-1, GB/T 16935.1).

When used in hazardous environments corresponding to Class I, Division 2 or Class I, Zone 2,

the device must be installed in a cabinet or a suitable enclosure.

EXPLOSION HAZARD

Do not connect or disconnect cables to or from the device when a flammable or combustible

atmosphere is present.

about mounting.

WARNING

Operating Instructions, 06/2022, C79000-G8976-C333-02

12M bus terminal