Siemens SIMATIC NET Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SIMATIC NET. Siemens SIMATIC NET 32 pagina's. Network components bus terminal
Ook voor Siemens SIMATIC NET: Gebruiksaanwijzing (29 pagina's), Gebruiksaanwijzing (50 pagina's), Gebruiksaanwijzing (28 pagina's), Montagehandleiding (6 pagina's), Productinformatie (6 pagina's), Installatiehandleiding (40 pagina's), Installatiehandleiding (50 pagina's), Installatiehandleiding (40 pagina's), Referentiehandleiding (14 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (48 pagina's)

Installation

2.1 Important notes on using the device

NOTICE

Improper mounting

Improper mounting may damage the device or impair its operation.

• Before mounting the device, always ensure that there is no visible damage to the device.

• Mount the device using suitable tools. Observe the information in the respective section

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

EXPLOSION HAZARD

Do not open the device when the supply voltage is turned on.

EXPLOSION HAZARD

Replacing components may impair suitability for Class 1, Division 2 or Zone 2.

The device is intended for indoor use only.

The device may only be operated in an environment of contamination class 1 or 2 (see EN/IEC

60664-1, GB/T 16935.1).

When used in hazardous environments corresponding to Class I, Division 2 or Class I, Zone 2,

the device must be installed in a cabinet or a suitable enclosure.

EXPLOSION HAZARD

Do not connect or disconnect cables to or from the device when a flammable or combustible

atmosphere is present.

about mounting.

WARNING

Operating Instructions, 06/2022, C79000-G8976-C333-02

12M bus terminal