Siemens SIMATIC PCS 7 Manual - Page 26

Browse online or download pdf Manual for Industrial Equipment Siemens SIMATIC PCS 7. Siemens SIMATIC PCS 7 39 pages. Process control system, basis library readme v9.0 sp1 online
Also for Siemens SIMATIC PCS 7: Introduction Manual (6 pages), System Manual (28 pages), Function Manual (42 pages), Operating Instructions Manual (36 pages), Read Me (26 pages)

Print Page

4 Parameterization

Procedure

1. After the drive is started up for the first time, the IOP-2 will offer you the options

shown in the image below.

Select Quick Startup.

Figure 4-1

Alternative:

If the drive was not previously reset to factory settings, you can get back to the

Quick Startup in the following way:

a. Navigate to the "Status" screen by pressing "ESC".

b. If this does not appear at the start, press the "ESC" key.

c. Switch to the setup selection via the gear icon in the lower list.

Figure 4-2

d. Then select "Quick Startup".

Figure 4-3

Integration of a SINAMICS G120X frequency converter in PCS 7

Entry ID: 109793986,

V1.0,

09/2021