Siemens SIMATIC PCS 7 Manuel - Sayfa 26

Endüstriyel Ekipmanlar Siemens SIMATIC PCS 7 için çevrimiçi göz atın veya pdf Manuel indirin. Siemens SIMATIC PCS 7 39 sayfaları. Process control system, basis library readme v9.0 sp1 online
Ayrıca Siemens SIMATIC PCS 7 için: Giriş Kılavuzu (6 sayfalar), Sistem Kılavuzu (28 sayfalar), İşlev Kılavuzu (42 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar), Beni Oku (26 sayfalar)

Sayfayı Yazdır

4 Parameterization

Procedure

1. After the drive is started up for the first time, the IOP-2 will offer you the options

shown in the image below.

Select Quick Startup.

Figure 4-1

Alternative:

If the drive was not previously reset to factory settings, you can get back to the

Quick Startup in the following way:

a. Navigate to the "Status" screen by pressing "ESC".

b. If this does not appear at the start, press the "ESC" key.

c. Switch to the setup selection via the gear icon in the lower list.

Figure 4-2

d. Then select "Quick Startup".

Figure 4-3

Integration of a SINAMICS G120X frequency converter in PCS 7

Entry ID: 109793986,

V1.0,

09/2021