Siemens SIMATIC S7 User Manual - Page 10

Browse online or download pdf User Manual for Industrial Equipment Siemens SIMATIC S7. Siemens SIMATIC S7 21 pages. Cpu 417-4 h, firmware-stand v 2.1.5
Also for Siemens SIMATIC S7: Product Information (28 pages), System Manual (20 pages)

Print Page

Colour monitor S7

Connect the angled connector of the data cable to the D-SUB connector on the monitor (2) and

secure the plug-in connection by tightening the safety screws.

Connect the even connector of the data cable to the active monitor port on the computer and

secure the plug-in connection by tightening the safety screws.

If your computer has two monitor ports ("onboard" screen controller and separate

graphics card), the monitor port for the separate graphics card is usually active.

Insert the two cinch connector of the audio line in the two AUDIO IN (3 and 4) sockets on the

monitor and make sure it is properly engaged.

Insert the stereo jack plug of the audio line in the audio output of the computer.

Plug the power adapter cable into the power connector (1) of the monitor.

Firmly insert the socket with the power cable supplied into the power cable connection of the

power adapter and check whether the socket is securely seated.

Connect the plug on the power cable supplied into a properly grounded mains outlet.

Plug the power connector of the computer into a properly grounded mains outlet.

When you start working with your monitor for the first time you should install the

appropriate graphics drivers for your application software. Details of how to do this are

provided in the documentation on your screen controller/the associated driver software.

Anti-theft protection

A lock (Kensington Lock) can be mounted in the security slot to protect the monitor from theft.

A Kensington Lock is not included in the consignment of the monitor.

8 - English

A26361-K877-Z100-4-5E19