Siemens SIMATIC S7 User Manual - Page 11

Browse online or download pdf User Manual for Industrial Equipment Siemens SIMATIC S7. Siemens SIMATIC S7 21 pages. Cpu 417-4 h, firmware-stand v 2.1.5
Also for Siemens SIMATIC S7: Product Information (28 pages), System Manual (20 pages)

Print Page

Operation of the monitor

Switching the monitor on/off

The ON/OFF switch (1) is used for switching the monitor on and off.

The power indicator glows green when the monitor and computer are switched on. The power

indicator glows amber when the monitor does not receive a video signal or is in the energy-saving

mode. The power indicator goes off when the monitor is switched off.

When you switch the computer system on, you must proceed in the following order:

First switch the LCD monitor on with the ON/OFF switch (1).

Then switch on the computer.

If your computer has a power management function (energy-saving mode), you should

read the "Notes on power management" of the monitor in this chapter.

Notes on power management

If your computer is equipped with power management, the monitor can support this function fully.

Here the monitor does not distinguish between the individual energy-saving modes of the computer

(standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the

mode with the highest energy-saving effect.

Stage

Power indicator

Function

Power consumption (typical)

A26361-K877-Z100-4-5E19

1 = ON/OFF switch with power indicator

lights green

Monitor operating normally

normal < 35 W

Colour monitor S7

Energy-saving mode

glows amber

Monitor is dark

reduced to < 4,5 W

English - 9