Siemens Simatic S7-1500 Application Description - Page 49

Browse online or download pdf Application Description for Industrial Equipment Siemens Simatic S7-1500. Siemens Simatic S7-1500 50 pages. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Also for Siemens Simatic S7-1500: Manual (40 pages), Manual (37 pages), Manual (47 pages), Manual (24 pages), Manual (34 pages), User Manual (45 pages), Manual (27 pages), Configuration Manual (20 pages), Manual (47 pages), Manual (43 pages), Manual (48 pages), Manual (26 pages), Manual (28 pages), Manual (50 pages), Manual (34 pages), User Manual (44 pages), Manual (50 pages), Manual (30 pages), Manual (41 pages), Manual (50 pages), Manual (40 pages), Safety Programming Manualline (48 pages), Communication Instruction Manual (36 pages), Manual (40 pages), Manual (25 pages), Manual (42 pages), Manual (28 pages), Manual (33 pages), Manual (49 pages), Manual (36 pages), Manual (41 pages), Manual (46 pages), Manual (38 pages), Manual (35 pages), Manual (39 pages), Manual (28 pages), Manual (35 pages), Equipment Manual (35 pages), Manual (50 pages), Equipment Manual (32 pages), Equipment Manual (38 pages), Manual (29 pages), Equipment Manual (38 pages), Manual (34 pages), Manual (36 pages), Equipment Manual (50 pages), Manual (45 pages)

Print Page

6 Operation of the Application

6.3 Sample scenario for operation

No.

Action

23.

Use the hot key to go to "Error".

24.

Provoke an error by

•

briefly removing the Ethernet connection

cable from the S7 CPU

•

briefly disconnecting the SINAMICS G120

from the 400V supply (LEDs must go off).

25.

Once communication has been reestablished,

you can acknowledge the error with a rising

edge at "Execute" of "MC_Reset".

26.

If you reduce the acceleration values in the

sample project to 1 to 5 m/s², ramp-up and

ramp-down will last several seconds, enabling

you to better monitor the change of the status

bits of the blocks and the axis during this time.

SINAMICS G120 as a Speed Axis on the S7-1500

V1.0a, Entry ID: 78788716

Remark

This is where you see the error bits of the

drive.

Disconnect a connection until the S7 CPU

displays an error.

Vary the parameters of the blocks in order to

test different situations.