Siemens SIMATIC TP700 Comfort Outdoor Operating Instructions Manual - Page 24
Browse online or download pdf Operating Instructions Manual for Industrial Equipment Siemens SIMATIC TP700 Comfort Outdoor. Siemens SIMATIC TP700 Comfort Outdoor 29 pages. Touch-sreen operator control panel
Also for Siemens SIMATIC TP700 Comfort Outdoor: Compact Operating Instructions (38 pages), Compact Operating Instructions (42 pages)
Print Page
Joint Sensor:
An external sensor detects a joint in the product which is metallic. This signal
sends to the machine the positions when the sensor saw the joint are indexed. The
machine will calculate the length of the joint and its position as it travels down the
line to the blade.
When the metallic joint arrives at the blade, the machine will automatically not cut
this piece so it cannot form part of a batch. The length after joint value is the length
after the joint signal has detected good product that the machine will allow before
resuming the normal cutting cycle.
When a joint is detected, the HMI will report that event. When the joint has arrived
at the blade, the machine will sound a beacon to alert the operator so the piece can
be removed once it has exited from the bushes.
The option is either On or Off. The parameters to set are:
Blade to Sensor (mm): This is the distance between the joint sensor and the blade
in millimetres. It is very important that this is entered
accurately to ensure proper performance of the joint mode.
Length after Joint:
This is the length in millimetres that the machine will allow
after the joint has been cut before returning to the normal
cutting cycle.
For more technical support, please go to our website:
www.gillardcutting.com/technical
23